Chevrolet G / P Series (1967-1970): repair manuals

Chevrolet / GMC Full-size vans - 6-cyl inline, 4.3L V6 and V8 gasoline engine models (1968-1996) | Haynes Repair Manual

Haynes Repair Manual covering the Chevrolet and GMC full-size vans.

Gasoline engines:
- 6 cylinders in line - 230 cu in (3.74 litre), 250 cu in (4.07 litre) and 292 cu in (4.75 litre)
- V6 - 262 cu in (4.3 litre)
- V8 - 283 cu in (4.6 litre), 305 cu in (4.96 litre, 307 cu in (4.99 litre), 350 cu in (5.69 litre) and 400 cu in (6.51 litre).

Model years: 1968-1996.

Exclusions: This manual does not cover the diesel models or the 454 gasoline engine, nor the 1996 Express or Savana models.

This Haynes manual for the Chevrolet and GMC Full-size vans from 1968-1996 describes service and repair of the gasoline engines (distribution, belts, valves, camshaft, cylinder head, oil pump, seals, and crankshaft).
It also includes procedures for the cooling, air conditioning, fuel system, exhaust plus the starting and charging system. Additionally, it describes work on the clutch, gearbox (removal and installation), driveshafts, braking system, suspension, steering box, body, interior, and electrical system.

• Step-by-step instructions with hundreds of detailed photos guide you through every job.
• Covers both U.S. and Canadian models.
• Based on a complete vehicle strip-down and rebuild.
• Includes a maintenance schedule, technical specifications, torque wrench settings, and troubleshooting tables.
• Clear and detailed wiring diagrams.

Product details

More information on the American Haynes Repair Manuals

Chevrolet / GMC Full-size Vans - gasoline and diesel engines (1967-1986) | Chilton Repair Manual

Chilton Repair Manual for the Chevrolet / GMC ½, ¾ and 1-ton Vans, including the Cutaway and Motor Home Chassis.

Gasoline engines: 6 cylinder - 230, 250 and 292 cu in / V8 - 283, 307, 350 and 400 cu in.

Diesel engines: V8 - 379 cu in.

Model years: 1967-1986.

This Chilton manual for the Chevrolet and GMC Full-ize vans from 1967-1986 covers maintenance and repair of the gasoline and diesel engines (timing gear, camshaft, inlet and outlet valves, cylinder head, crankshaft, lubricating system, and gaskets).
It also addresses cooling, air conditioning, fuel system, exhaust, and the electrical system. Additionally, it describes work on other components, such as the clutch, transmission (only removal and installation), front and rear axles, springs and shock absorbers, the steering system, brakes and body.

• Covers both U.S. and Canadian models.
• Includes technical specifications, adjustment data, torque wrench settings, and wiring diagrams.
• Tables for troubleshooting and identification of models and engines.

Product details

More information on the Chilton Repair Manuals

1967 Chevrolet Truck - Chassis Overhaul Manual - Series 10-60

Official factory workshop manual (reprint) for overhaul of the chassis of the 1967 Chevrolet Series 10-60 pickups and trucks.

Models:
- C10 Panel, C10 Pickup, C10 Suburban, C20 Panel, C20 Pickup, C20 Suburban, C30 Pickup
- C50, C60
- G10 Van, G20 Van
- K10 Pickup, K10 Suburban, K20 Panel, K20 Pickup, K20 Suburban
- P10 Series, P10 Van, P20 Series, P30 Series.

Covers disassembly and assembly of the major components:
- engine
- coolant pump
- carburators
- starter motor
- transmission and clutch
- differential
- steering gear, power steering pump and control valve
- master cylinder
- air conditioning compressor.

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 134-67.

Product details

1967 Chevrolet Truck - Chassis Service Manual - Series 10-60

Official factory workshop manual (reprint) for maintenance and repair of the mechanical components of the 1967 Chevrolet Series 10-60 pickups and trucks.

Models:
- C10 Panel, C10 Pickup, C10 Suburban, C20 Panel, C20 Pickup, C20 Suburban, C30 Pickup
- C50, C60
- G10 Van, G20 Van
- K10 Pickup, K10 Suburban, K20 Panel, K20 Pickup, K20 Suburban
- P10 Series, P10 Van, P20 Series, P30 Series.

Covers only the chassis (not the body):
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 133-67.

Product details

1968 Chevrolet Truck - Chassis Overhaul Manual - Series 10-60

Official factory workshop manual (reprint) for overhaul of the chassis of the 1968 Chevrolet Series 10-60 pickups and trucks.

Models:
- C10 Pickup, C10 Suburban, C20 Pickup, C20 Suburban, C30 Pickup
- C50, C60
- G10 Van, G20 Van
- K10 Pickup, K10 Suburban, K20 Pickup, K20 Suburban, K30 Pickup
- P10 Van, P20 Van, P30 Van.

Covers disassembly and assembly of the major components:
- engine
- coolant pump
- carburators
- starter motor
- transmission and clutch
- differential
- steering gear, power steering pump and control valve
- master cylinder
- air conditioning compressor.

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 134-68.

Product details

1968 Chevrolet Truck Series 10-60 - Chassis Service Manual

Official factory workshop manual (reprint) for maintenance and repair of the mechanical components of the 1968 Chevrolet Series 10-60 pickups and trucks.

Models:
- C10 Pickup, C10 Suburban, C20 Pickup, C20 Suburban, C30 Pickup
- C50, C60
- G10 Van, G20 Van
- K10 Pickup, K10 Suburban, K20 Pickup, K20 Suburban, K30 Pickup
- P10 Van, P20 Van, P30 Van.

Covers only the chassis (not the body):
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 133-68.

Product details

1969 Chevrolet Truck - Chassis Overhaul Manual - Series 10-60

Official factory workshop manual (reprint) for overhaul of the chassis of the 1969 Chevrolet Series 10-60 pickups and trucks.

Models:
- Blazer
- C10 Pickup, C10 Suburban, C20 Pickup, C20 Suburban, C30 Pickup
- C50, C60
- G10 Van, G20 Van
- K10 Pickup, K10 Suburban, K20 Pickup, K20 Suburban, K30 Pickup
- P10 Van, P20 Van, P30 Van.

Covers disassembly and assembly of the major components:
- engine
- coolant pump
- carburators
- starter motor
- transmission and clutch
- differential
- steering gear, power steering pump and control valve
- master cylinder
- air conditioning compressor.

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 134-69.

Product details

1969 Chevrolet Truck Series 10-60 - Chassis Service Manual

Official factory workshop manual (reprint) for maintenance and repair of the mechanical components of the 1969 Chevrolet Series 10-60 pickups and trucks.

Models:
- Blazer
- C10 Pickup, C10 Suburban, C20 Pickup, C20 Suburban, C30 Pickup
- C50, C60
- G10 Van, G20 Van
- K10 Pickup, K10 Suburban, K20 Pickup, K20 Suburban, K30 Pickup
- P10 Van, P20 Van, P30 Van.

Covers only the chassis (not the body):
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 133-69.

Product details

1970 Chevrolet Passenger Cars, 10-60 Series Trucks and 1969 Corvette - Chassis Overhaul Manual

Official factory workshop manual (reprint) for overhaul of chassis components of the 1970 Chevrolet passenger cars and Chevrolet / GMC 10-60 Series pick-ups, vans and trucks.

Models:
- Camaro, Bel Air, Biscayne, Chevelle, El Camino, Impala, Kingswood, Monte Carlo, Nova, Townsman, 1969 Corvette
- Blazer
- C10 Pickup, C10 Suburban, C20 Pickup, C20 Suburban, C30 Pickup
- G10 Van, G20 Van, G30 Van
- K10 Pickup, K10 Suburban, K20 Pickup, K20 Suburban, K30 Pickup
- P10 Van, P20 Van, P30 Van
- C50, C60.

Covers disassembly and assembly of the major components:
- engine
- coolant pump
- carburators
- starter motor
- transmission and clutch
- 4x4 system (transfer case and front axle)
- differential
- steering gear, power steering pump and control valve
- master cylinder
- air conditioning compressor.

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 131-70.

Product details

1970 Chevrolet Truck Series 10-60 - Chassis Service Manual

Official factory workshop manual (reprint) for maintenance and repair of the mechanical components of the 1970 Chevrolet Series 10-60 pickups and trucks.

Models:
- Blazer
- C10 Pickup, C10 Suburban, C20 Pickup, C20 Suburban, C30 Pickup
- C50, C60
- G10 Van, G20 Van, G30 Van
- K10 Pickup, K10 Suburban, K20 Pickup, K20 Suburban, K30 Pickup
- P10 Van, P20 Van, P30 Van.

Covers only the chassis (not the body):
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST133-70.

Product details