Differenziale Reparaturanleitungen

Jeep, Dana and Chrysler Differentials - How to Rebuild the Chrysler 8 ¼, 8 ¾, Dana 44 & 60 and Amc 20

Dieses Buch konzentriert sich auf den Wiederaufbau und die Aufrüstung von Hochleistungsdifferentialen, die in verschiedenen Chrysler-Muskelfahrzeugen wie dem Challenger, Charger, Barracuda und Super Bee sowie in Jeep-Modellen wie dem CJ und Cherokee verwendet werden.
Chrysler setzte die Dana 60 und BorgWarner Sure-Grip-Differentiale in seinen Musclcars ein, die mit leistungsstarken Motoren wie dem Magnum und Hemi V8 kombiniert wurden und in den Motorsportrenns ihren historischen Beitrag leisteten. Jeep-Modelle mit Dana 44 und AMC 20-Differentialen müssen ebenfalls mit enormen Lasten umgehen, was häufige Überholungen erfordert.

Nach jahrelangem Gebrauch müssen diese Differentiale überholt werden, und es sind Aftermarket-Teile wie Ring- und Ritzel erhältlich, um Aufrüstungen vorzunehmen. Dieses Buch bietet eine detaillierte Schritt-für-Schritt-Anleitung zur Demontage, Inspektion und dem Wiederaufbau der beliebtesten Hochleistungsdifferentiale.

Axial- und Differentialkomponenten sind nicht besonders komplex, aber richtige Wiederaufbau- und Aufrüstungsprozesse erfordern spezifische Schritte. Dieses Buch vereinfacht den Prozess und behandelt ihn im Detail. Besonders berücksichtigt werden Ring- und Ritzelzahnräder sowie die Auswahl der besten Aftermarket-Achswellen und die Modifikation von Differentialgehäusen für Leistungssteigerungen.

Details

Autor:	Larry Shepard
Ausführung:	176 Seiten, 28 x 21.5 x 1 cm, kartoniert
Abbildungen:	400 Farbfotos
Verlag:	CarTech Inc (USA, 2013)
Serie:	S-A Design Workbench (SA253)
ISBN:	9781613250495

Mehr Info über die CarTech Workbench Bücher

Ford Differentials - How to Rebuild the 8.8 Inch and 9 Inch

The Ford 8.8- and 9-inch rear differentials are two of the most popular and best performing differentials on the market. While the 8.8-inch differential is commonly used in late-model Mustangs, the 9-inch is the most popular and arguably the most dominant high-performance differential for muscle cars, hot rods, custom vehicles and race cars. Built from 1957-1986, the 9-inch Ford differential is used in a huge range of high-performance Ford and non-Ford vehicles because of its rugged construction, easy-to-setup design, and large aftermarket support.

The Ford 8.8- and 9-inch need to be rebuilt after extensive use and need a variety of different ratios for top performance and special applications. This Workbench book provides detailed step-by-step photos and information for rebuilding the differentials with the best equipment and installing the gear sets and converting to posi-traction for a variety of applications.
It shows how to disassemble the rear end, identify worn ring and pinion gears and other damage or wear, and proceeds to show step-by-step rebuilding of the differential. It also explains how to select the right differential hardware, bearings, seals, and other parts, as well as how to set ring and pinion backlash, so the rear end operates at peak efficiency.

Aftermarket 9-inch performance differentials from manufacturers, such as Currie, Moser and Strange, will be reviewed and the reader will learn how to rebuild and set-up these high-performance aftermarket differentials. In addition, the book provides a comprehensive 9-inch identification chart to ensure readers properly identify the model and specifics of the differential.

Chapters include axle identification, inspection, and purchasing axles for rebuilding, differential tear down, ring and pinion gear removal, inspection and reassembly, drive axle choices and more.

Details

Autor:	Joseph Palazollo
Ausführung:	144 Seiten, 27.5 x 21 x 0.9 cm, kartoniert
Abbildungen:	400 Farbfotos
Verlag:	CarTech Inc (USA, 2013)
Serie:	S-A Design Workbench (SA249)
ISBN:	9781613250389

Mehr Info über die CarTech Workbench Bücher

High-performance Differentials, Axles and Drivelines

This book covers everything you need to know about selecting the most desirable gear ratio, rebuilding differentials and other driveline components, and most importantly, matching the correct driveline components to engine power output.

Learn how to set up a limited-slip differential, install high-performance axle shafts, swap out differential gears, and select the best available products for the driveline.

This book covers the Chevy 12-bolt, Ford 8.8-inch, Dana units, and many other popular high-performance axles and rear ends.

In addition, it explains rear differential basics, rear differential housings, rebuilding open rear differentials, limited-slip differentials, and factory differentials. Ring and pinion gears, axle housings, axle shafts, driveshafts, and U-joints are also covered.

Details

Autor:	Joseph Palazzolo
Ausführung:	144 Seiten, 27.5 x 21.5 x 1 cm, kartoniert
Abbildungen:	369 Farbfotos
Verlag:	CarTech Inc (USA, 2010)
Serie:	S-A Design (SA170)
ISBN:	9781934709023

Mehr Info über die CarTech S-A Design Bücher

Chevy Differentials - How to Rebuild the 10- and 12-Bolt

Millions of Chevrolet vehicles were built and sold in the 1960s and 1970s, and the great majority of those were rear-wheel-drive models with differentials known as 10-bolts or 12-bolts. High-performance limited-slip versions of these differentials also have been installed in Camaros, Chevelles, Corvettes, and many other GM muscle cars from 1964 through the 1970s, as well as Chevy and GMC trucks. If you have owned a GM performance car from the 1960s or 1970s, you have owned one of these sturdy, reliable, and versatile differentials.

Many of these differentials are now more than 40 years old and are due for an overhaul. In Chevy Differentials: How to Rebuild the 10- and 12-Bolt, author Jefferson Bryant walks you through the entire process of disassembling, evaluating, and rebuilding the perfect differential for your GM application. In this step-by-step guide, you learn how to completely disassemble the differential, evaluate components, and select replacement parts. You're also shown all of the up-to-date techniques for re-assembling the differential and axle. Informative sections on axle identification and replacement parts are also provided.

Details

Autor:	Jefferson Bryant
Ausführung:	144 Seiten, 28 x 21.5 x 0.8 cm, kartoniert
Abbildungen:	reich illustriert
Verlag:	CarTech Inc (USA, 2015)
Serie:	S-A Design (SA310)
ISBN:	9781613251614

Mehr Info über die CarTech S-A Design Bücher