Motori marini Ford USA V8: manuali di manutenzione e riparazione (2/2)

Ford FE Engines - How to Rebuild: Complete Step-by-Step Instruction for 330- to 428-ci Engines

Ford FE engines, which were manufactured from the late 1950s all the way through the mid-1970s, were designated as the large-displacement engines in the Ford lineup. FE means Ford Edsel and reflects an era when Ford sought to promote the Edsel name. The design of these engines was implemented to increase displacement over its predecessor, the Y-Block engines of the previous decade.

This book shows you how to rebuild one of these legendary engines. CarTech's unique Workbench series format takes you step-by-step through the entire rebuilding process.
Covered are engine identification and selection, disassembly, cleaning, parts analysis and assessment, machine shop processes, replacement parts selection, reassembly and start-up/break-in techniques. Along the way are helpful tips on performance upgrades, trouble spots to look for, special tools required, and professional builder's tips.

Maggiori informazioni sui libri CarTech Workbench

Dettagli del libro

Autore:	Barry Rabotnick
Formato:	144 pagine, 28 x 21.5 x 1 cm, brossura
Illustrazioni:	388 foto in colori
Lingua:	inglese
Editore:	CarTech Inc (USA, 2016)
Collana:	S-A Design Workbench (SA352)
ISBN:	9781613252444

Ford 429 / 460 Engines - How to Rebuild (Revised Edition)

Ford was unique in having two very different big-block engine designs during the muscle car era. The original FE engine, developed in the late 1950s, replaced the Y-block design and became a high-performance engine, winning Le Mans and drag racing championships in the 1960s.

By the late 1960s, the FE engine was outdated and was replaced by the 385 series, which came in 429 and 460 cubic inch versions. While it didn't have the same racing legacy as the FE, the new design was an improvement in almost every way and is still part of Ford's motorsport offerings today.

Starting in 1971, the 429 engine powered Mustangs and Torinos in high-performance versions like the Cobra Jet and Super Cobra Jet, making it one of Ford's most powerful engines.

In "Ford 429/460 Engines: How to Rebuild, " Ford expert Charles Morris provides a complete guide to rebuilding these engines. This step-by-step manual covers everything from engine inspection and disassembly to reassembly, tuning, and even building the special Boss 429 engines. Also included is a bonus chapter on the Ford 351 Cleveland engine.

Maggiori informazioni sui libri CarTech Workbench

Dettagli del libro

Autore:	Charles Morris
Formato:	144 pagine, 28 x 21.5 cm, brossura
Illustrazioni:	599 foto in colori
Lingua:	inglese
Editore:	CarTech Inc (USA, 2019)
Collana:	S-A Design Workbench (SA162P)
ISBN:	9781613254929

How to Rebuild 4.6L & 5.4L Ford Engines

S-A Workbench manual for the complete rebuild of Ford Modular V8 4.6L and 5.4L gasoline engines, as used since the 1990s in Ford, Lincoln and Mercury passenger cars, vans and pick-ups.

Types:
- 4.6 L SOHC (2 or 3 valves per cylinder)
- 4.6 L DOHC (4 valves per cylinder).
- 5.4 L SOHC (2 or 3 valves per cylinder).
- 5.4 L DOHC (4 valves per cylinder).

• Step-by-step instructions and hundreds of photos clearly describe the work on the Ford 4.6L and 5.4L V8 petrol engines.
• Chapters on planning, disassembly and inspection, cleaning, choosing the right parts, machining, engine assembly, first start and running-in.
• The engine block, crankshaft and pistons, lubrication system, camshafts, cylinder heads, valve train, ignition, fuel system and carburetors are covered.
• Complete with adjustment data, such as valve clearances and tightening torques.
• This book also contains useful advice for improving reliability and performance.

Maggiori informazioni sui libri CarTech Workbench

Dettagli del libro

Autore:	George Reid
Formato:	144 pagine, 28 x 21.5 cm, brossura
Illustrazioni:	456 foto in colori
Lingua:	inglese
Editore:	CarTech Inc (USA, 2015)
Collana:	S-A Design Workbench (SA155)
ISBN:	9781613252284

Ford Big-Block Parts Interchange - Covers all FE, MEL & 385 Series Engines

The Ford FE engine, introduced in the late 1950s, was developed as a more powerful replacement for the Y-block to meet the demands of larger, heavier cars. Initially designed for torque to move heavy sedans, FE engines evolved into high-performance units that achieved success in Le Mans and drag racing during the 1960s.

By the late 1960s, the FE design was replaced by the "385" series, also known as the Lima design, which incorporated canted-valve technology similar to the Cleveland engines. While it lacked the racing pedigree of the FE, the 385 series offered improved performance and remains available through Ford motorsports programs.

This book, by Ford expert and historian George Reid, provides complete coverage of these engines. It details interchangeability and availability of components, including crankshafts, rods, pistons, camshafts, engine blocks, intake and exhaust manifolds, carburetors, distributors, and more.

Building on the previous "High-Performance Ford Parts Interchange", which covered both small- and big-blocks, this edition focuses exclusively on MEL, FE, and 385-series big-blocks, allowing for more thorough and detailed coverage.

Maggiori informazioni sui libri CarTech S-A Design

Dettagli del libro

Autore:	George Reid
Formato:	144 pagine, 28 x 21.5 cm, brossura
Illustrazioni:	400 foto in colori
Lingua:	inglese
Editore:	CarTech Inc (USA, 2018)
Collana:	S-A Design (SA397)
ISBN:	9781613253441